The Soundtrack Player is a practical solution since it’s a streaming box fully dedicated to our music service. If you would like to control the playback from a mobile device, you can learn more here.
What's included
Your Soundtrack Player package contains everything you need to get started:
- 1 x Soundtrack Player
- 1 x Ethernet cable
- 1 x RCA Cable (male/male)
- 1 x Power Supply Unit (PSU) for your region
Setup guide
- Log in to your account here.
- Navigate to "Zones" in the left menu and select the zone you wish to configure.
- Under "Pair a player", choose "Hardware". Enter the device ID found on the underside of your Soundtrack Player and click "Connect hardware player".
- Connect the power cable. Lights on the front of the unit will illuminate when it's powered on.
- Connect the Ethernet cable for internet access and an audio cable (RCA or 3.5mm) to your sound system.
- Enjoy the music! Please note that it may take up to 15 minutes for music to start playing after connecting the network cable.
The player features two LED lights: the left indicates internet connection, and the right shows music playback status. For a detailed list of LED indicator meanings, please refer to this guide.
Key Features and Specifications
- 16 GB internal memory: Stores up to two weeks of music.
- RCA outputs: For analog audio connections.
- Automatic updates: Your device receives the latest software updates remotely.
- Network configuration: Uses dynamic IP by default; static IP configuration is also supported.
- Complete package: All necessary cables and an installation guide are included.
- Dimensions & weight: 108 mm (W) x 79 mm (H) x 38 mm (D) (aluminum case); 250 grams.
- 1-year warranty
To purchase a Soundtrack Player, please learn more and order here.
How to configure the player with Static IP
For static IP configuration, follow these steps:
- Adjust the attached .json file with your network information.
- Copy the .json file to an empty USB stick. Do not rename the file.
- Restart the Soundtrack Player without an attached network cable. The LED lights should blink green, then orange, to confirm a successful restart.
- Plug the USB stick into the Soundtrack Player. The LED lamps will show a green light to confirm the settings have been applied.
- After seeing the confirmation blinks, unplug the USB stick and restart the Soundtrack Player by briefly removing and reinserting the power cable.
Need help? Please check this guide for troubleshooting.